| The Source for Video Surveillance | See Plans and Prices - IP Video Pro Service |
How to Position Video Surveillance Cameras
by John Honovich, IP Video Market Info posted on Jan 15, 2009 About John Contact John
This report shares best practices for positioning surveillance cameras and is based on standards I developed as an integrator.
Figuring out the right number, placement and views of cameras can save significant money and provide a much more effective system. This is a critical element regardless of using IP or not. Moreover, this is an important skill set that IT techs coming into video surveillance must ensure they develop.
Here are the 4 steps I recommend:
- Determine Places for Cameras
- Determine Camera Types
- Determine View of Cameras
- Verify with Customer
Places for Cameras
Cameras should be placed in two types of places:
- Where there is an asset you are trying to defend
- Where there is a choke point toward an asset you are trying to defend
You place cameras looking at assets because you want to record anything adversarial that might occur to the asset: theft, destruction, tampering, etc.
You place cameras at choke points so (1) you can get notice as soon as possible of a potential threat and (2) so you can get a clear shot at the person (or vehicle's) characteristics.
This works the same whether it is a military base or a grocery store. Obviously the assets and location of choke points differ but these guidelines remain.
For example, at a convenience store, the assets are typically the cash register, safe, liquor section and stockroom. You would normally expect a camera to be placed to cover each of these assets. In addition, at a convenience store, the choke points are usually the front entrance (customer entrance) and sometimes the back/service entrance. You would generally expect to see cameras covering these locations.
Camera Type Selection
You have 3 general types of cameras to choose from:
- Fixed cameras: the view is locked on to a specific area
- Mechanical PTZs: the view can be manually adjusted by an operator over great distances but the system can only record the current area viewed
- Panoramic cameras: the view can be manually adjusted by an operator over small area and the the system can record the entire area covered
Fixed and mechanical PTZs are the two traditional options. Panoramic cameras are an emerging category and are almost always megapixel IP.
Here are guidelines in choosing:
- Use fixed cameras if there is a very specific area of interest and you do not have an operator watching in real time
- Use PTZ cameras if there is a large area of interest (more than 200 square feet/25 square meters) AND you have an operator watching in real time
- Use Panoramic cameras if you have an IP enabled video management system that supports the panoramic cameras and you do not have an operator watching in real time
Views of Cameras
Picking the general location of cameras is only half of the solution. For example, you know you want to protect the safe or cover the front door.
Additionally, you need to make sure that the camera is set up so it properly captures the target. It matters if the camera is too high or too much to the left or right. It also matters, it the camera is zoomed out too much so that you cannot make out detail or the opposite that it is zoomed to far and you miss part of the person or object in question. Such issues happen all the time and is a primary concern of integrators.
Technically, you need to determine and optimize the Field of View (FoV). Below is a very good webcast on Field of View from Peter Brissette at DVR manufacturer GSP.
Verify with Customer
Before you install any cameras, you should prepare and provide the following documentation to the security manager:
- Take a photo of the approximate FoV of the camera
- Take a photo of the place where you plan to mount the camera. Mark the exact spot on the photo
- Prepare a map of the facility. Mark the location of each camera on the map
- Submit all of this in a report
This may sound time consuming and wasteful but I think it is critical (1) to ensure that the objectives are met and (2) to eliminate re-work and changes after installation.
Without pictures and plans, it's very hard to imagine how exactly cameras should be placed. It is also very easy for misunderstandings to occur ("I thought you were going to mount in on this side rather than that side", etc.).
A careful planned and documented design is a key tool in deploying optimized video surveillance solutions.
Most Recent Industry Reports
Testing Cisco-Linksys Switch for IP Video (SRW208P) on Sep 01, 2010
Switch selection for IP video surveillance is a key consideration in overall design. Unfortunately, it is often less scrutinized than the 'stars' of the solution (i.e., VMS and cameras). Moreo...
Testing Milestone GO VMS (Free 8 Ch) on Aug 29, 2010
Milestone's aggressive moves targeting the smaller video surveillance systems continue. This month's release of a free 8 channel VMS, called XProtect Go, adds to their June 2010 release that droppe...
Testing the iCam VMS / iPhone App on Aug 29, 2010
Home video surveillance systems are quickly getting a lot better and a lot cheaper. A good example of this is an application called iCam that has recently been in the news for helping a homeowner d...
Training: VSaaS Hosted/Managed Basics on Aug 22, 2010
This hour long training explains the basics behind Video Surveillance as a Service (VSaaS). If you want to learn about the most talked about emerging trend in the industry, this is an ideal place t...
Training: Megapixel / HD Basics on Aug 18, 2010
This report provides a 95 minute video series that teaches the fundamentals of using, selecting and applying megapixel video surveillance in real world deployments. We cover 9 fundamental aspects: ...
Real World CCTV / Surveillance Success on Aug 16, 2010
In this report, we find, review and share 50+ real world success stories using video surveillance. These are actual documented examples where crimes, murders, thefts and more have been recorded and...
Testing Archerfish Solo Smart Camera / DVR / VSaas (Cernium) on Aug 09, 2010
Combining many video surveillance functionalities in a single device is a growing trend. The hope is providing a turn-key, 'all-in-one' solution simplifies deployment and provides everything one ne...
Directory of Budget / Home / SMB IP Cameras on Aug 07, 2010
We have completed a broad testing program of budget IP cameras for use in the home or SMB markets. This directory provides links to each test. Full test results including video screencasts and vid...
Testing Rogo's Managed VSaaS on Aug 04, 2010
Managed / hosted video offerings continue to expand with a variety of technical and business approaches. In this test, we examine Rogo's Managed Video offering. The system uses an on-site recordin...
Testing Lorex's IP Camera (LNE1001) on Aug 03, 2010
Simplifying remote viewing is a key element in choosing and using IP cameras for home and small business users. Doing it the 'old fashion' way can require technical skill, be cumbersome and frustra...
Topics Monitored
| Topic |
|---|
| Case Studies |
| Convergence |
| Financials |
| Hosted/Managed Video |
| IP Cameras |
| Megapixel Cameras |
| Retail |
| Standards |
| Statistics |
| Storage |
| Video Analytics |
| Video Management Systems |
| Wireless |
81 Companies Monitored
Find:
Find: